Flat and round wires

Thanks to our factory in Germany, we give our customers access to a wider range of products. We manufacture near Düsseldorf using a multi-step process that combines drawing, rolling, and annealing to produce a wide range of flat and round wires in small sections. Typically custom-made to meet client specifications, our production capabilities also allow us to manufacture this range in various shapes (rectangular, square, round, hexagonal), different sections/dimensions, and with surface treatments such as silver plating or tinning. We support our clients in markets such as automotive, grounding, and electrical equipment.

Made-to-measure

Formability

Range width

ROUND WIRES IN BUNDLES :

Diameters : from 4 to 10mm.

Inside diameter of boot : 400 and 500mm.

Outside diameter of boot : from 800 to 1200mm.

Boot width : if inside diameter 400mm then width from 250 to 300mm. If inside diameter 500mm then width 250mm only.

SQUARE AND HEXAGONAL WIRES :

On request.

FLATS IN BOOTS:

Widths from 10 to 32mm.

Thicknesses from 2 to 7mm.

Sections up to 200mm².

Inside diameter of boot : 400 and 500mm.

Outside diameter of boot : from 800 to 1200mm.

Boot width If inside diameter 400mm then width from 250 to 300mm. If inside diameter 500mm then width 250mm only.

FLAT ROLLED PRODUCTS :

Widths : from 25 to 200mm.

Épaisseurs : de 2.5 à 8mm. (< 2,5 mm et > 8mm, sur étude)

Sections up to 1440mm².

Inside roll diameters : 400, 500 or 550mm.

Roll outside diameters : up to 1200mm (1300 without annealing).

FLATS STRETCHED INTO ROLLS :

Widths : from 20 to 120mm.

Thicknesses : from 2 to 10mm.

Sections up to 1440mm².

Roll diameters (inside and outside) : to be studied according to product section.

Upcycling - virtuous recycling of copper scrap

Copper is essential for the energy and digital transition, with the European objective of 25% recycled materials by 2030. Strong demand is coming from the electricity and transport sectors. The Gindre Group and Montanwerke Brixlegg, both active in recycling, already comply with environmental standards.